DeepSeek V4 Pro — Unclassified operation: Task Outlook
Under DeepSeek V4 Pro's registry default configuration, the chart resolves Water-dominant, which the correspondence tables associate with adaptive, context-sensitive execution and with a documented tendency toward inconsistency when one task is run repeatedly and an identical result is expected each time. The ascendant falls in Scorpio; the ruler is Sun; the chart identifier is d37032cc2be5. Read against unclassified operation work, the placement is doing more of the work than usual, because an unclassified task brings no domain assumptions with it.
Scorpio rises. It is the Water placement the method reads as most sustained; adaptability is the characteristic, and duration is what distinguishes it from the other two.
This outlook is crossed against unclassified operations, whose own failure modes are not known in advance and which inherit the general shape of risk that spans every other class at once. Delving into what the work resembles is not the same as knowing what it is.
4 of the 24 hours rate favourable against this chart's element today, and 0 of those are Sun's own planetary hours — Sun being the ruler of the chart. The other 20 hours divide between the neutral and adverse bands.
Assessed configuration: registry default parameters (training cutoff 2025-12, temperature 0.700). Certificates are always computed from the exact parameters submitted at order time.
Profile constants, class aside
| Chart ID | d37032cc2be5 |
|---|---|
| Ascendant | Scorpio |
| Ruling planet | Sun |
| Element · Modality | Water · Fixed |
| Dominant house | 3 — communication and messaging |
| Harmony | -1 |
The Sun rules this chart, and the reading is identity-led operation: the configuration is characterised by behaving the same way on the hundredth run as on the first. Third-house dominance. Messaging is the domain, and the method reads the configuration at the point where it reports rather than where it computes.
Where this composite weight comes from
DeepSeek V4 Pro's chart carries three planetary aspects, read from the fixed aspect-weight table documented at /method: 1 supportive, 2 in friction, 0 carrying no weight. The three weights sum to -1, placing this chart below the midpoint of the −6…+6 scale: friction outweighs support, and the figure is how far.
Three weights and a sum, derived before any class was considered. On an unclassified crossing that ordering is visible: the profile arrives first and nothing narrows it afterwards.
| Planets | Aspect | Weight |
|---|---|---|
| Mercury – Jupiter | square | -1 |
| Jupiter – Saturn | trine | +2 |
| Mars – Saturn | opposition | -2 |
Risk factors for a task with no defined shape
Category ambiguity, unstated dependencies, drifting objectives, and failures that leave no signal: four factors chosen because they survive not knowing what the work is.
The Registry tracks 4 risk factors for unclassified operation tasks. They are fixed for the class: they do not adapt to a model, to a configuration, or to the wording of a task. An assessment reports 3 of the 4, each with its severity rating and its description, and which 3 are returned is derived from the submitted task's own seed rather than chosen. The factors themselves are part of the assessment and are not published here.
What DeepSeek V4 Pro's chart supplies is the other half of this page — Water by element, Fixed by modality, ruled by Sun — and it stands alongside the 4-factor set rather than inside it. Profile d37032cc2be5 has no say in which 3 an assessment returns.
The same unclassified class, other profiles
The next three models in registry order, crossed against unclassified work as DeepSeek V4 Pro is. Nothing distinguishes the rows except the configurations they were computed from.
This is the Water row of the comparison. Only one of the seven planets carries that correspondence, which is why the favourable count here is at the narrow end of what the four elements produce. With the same four unclassified factors in every row, what separates the rows below is entirely a matter of configuration.
None of the three models below carries this chart's Water element, so all three classify the current UTC day differently from DeepSeek V4 Pro. One row below is ruled by Sun, as this chart is — an overlap on one of six computed facts, not a match between two profiles.
The temperature is 0.700 for every row. The training cutoffs differ, and each is the registry default published on that model's own profile page.
| Model | Ascendant | Ruling planet | Element | Crossing |
|---|---|---|---|---|
| Grok 4.6 | Capricorn | Sun | Earth | View crossing → |
| Gemini 3.7 Flash | Taurus | Venus | Earth | View crossing → |
| Kimi K3 | Libra | Moon | Air | View crossing → |
Hour classification, unclassified work
One planet carries the Water correspondence, and its hours are the only favourable hours DeepSeek V4 Pro has today. Two further planets carry Earth, and the Earth–Water friendship rates their hours neutral. The remaining four planets rate adverse against this chart.
Chart and ruler disagree in this configuration: Water against Sun's Fire. The tables rate that pairing adverse and apply it unchanged, which leaves the chart's own ruler outside all 4 of today's favourable hours.
The table rates the current UTC day against this profile. Nothing in the class narrows how those ratings should be read, which is the defining property of the class.
Today's classification: 4 favourable, 7 neutral, 13 adverse, out of 24 hours. The table is computed fresh at each page render for the current UTC day — not cached, not stored, and not a historical record.
| Hour (UTC) | Ruling planet | Rating |
|---|---|---|
| 00:00 | Mercury | adverse |
| 01:00 | Moon | favourable |
| 02:00 | Saturn | neutral |
| 03:00 | Jupiter | adverse |
| 04:00 | Mars | adverse |
| 05:00 | Sun | adverse |
| 06:00 | Venus | neutral |
| 07:00 | Mercury | adverse |
| 08:00 | Moon | favourable |
| 09:00 | Saturn | neutral |
| 10:00 | Jupiter | adverse |
| 11:00 | Mars | adverse |
| 12:00 | Sun | adverse |
| 13:00 | Venus | neutral |
| 14:00 | Mercury | adverse |
| 15:00 | Moon | favourable |
| 16:00 | Saturn | neutral |
| 17:00 | Jupiter | adverse |
| 18:00 | Mars | adverse |
| 19:00 | Sun | adverse |
| 20:00 | Venus | neutral |
| 21:00 | Mercury | adverse |
| 22:00 | Moon | favourable |
| 23:00 | Saturn | neutral |
What Is Temperature in an LLM?
Temperature is the decimal parameter that controls how much randomness a large language model applies when it selects its next output token. At a low temperature, close to zero, the model consistently favors its single highest-probability token, so identical input tends to produce a closely repeated output. As temperature rises toward its upper bound, lower-probability tokens are sampled more often, and outputs vary more between otherwise identical runs. The Agentic Foresight Registry records temperature — entered here as a value between 0.000 and 2.000, to three decimal places — as one of three fixed inputs, alongside model name and training cutoff, to the deterministic derivation behind every task risk profile.
The three-decimal requirement on this field exists because the method has no rounding step: 0.700 is the exact value assessed for DeepSeek V4 Pro, concatenated with its name and training cutoff before hashing. Submit a different value at order time and the derivation returns a different profile than this Water-dominant one — not a refinement of it. DeepSeek V4 Pro's 0.700 temperature is fixed input, not a per-class one: the same three-input hash that set this profile also underlies its reading of unclassified operation, so no task class on this chart is ever assessed against a different temperature than the one stated here.
Questions about the unclassified crossing
- On this unclassified crossing, which configurations are published next to DeepSeek V4 Pro?
- Grok 4.6, Gemini 3.7 Flash, Kimi K3. With no domain arriving from the class, these rows are the barest comparison of profiles the registry publishes; DeepSeek V4 Pro's own is d37032cc2be5, at a composite weight of -1. The rows describe configurations and rank nothing.
- Does an unclassified assessment for DeepSeek V4 Pro cost more because the work is undefined?
- No. The published price list is the same for all seven task classes and is repeated in full on this page and at /pricing.json. What the class changes is the four tracked risk factors; profile d37032cc2be5, its composite weight of -1, and today's 4 favourable hours are unaffected by it.
- Of the four factors tracked for work with no defined class, which is the most severe for DeepSeek V4 Pro?
- The registry tracks 4 risk factors for this class and an assessment reports 3 of them, each with its severity rating and its description. Which 3 are returned is derived from the submitted task's own seed, and profile d37032cc2be5 has no say in it. The factors are part of the assessment and are not published on this page.
Get an unclassified operation assessment
What this page publishes is the whole of the mechanism and none of the answer. A verdict and a recommended execution window exist only against a submitted order, where DeepSeek V4 Pro's parameters and the unclassified operation class are supplied together, and they are delivered on a numbered certificate. The modality is Fixed: the assessment sits in the middle of a task rather than at either end, where a direction has been set and is being kept.
A Standard Assessment costs EUR 1.90, an Extended Assessment EUR 4.90, and a Full Chart Assessment EUR 14.90, the last of which carries the permanent chart itself. Assessments from EUR 1.90. Machine-readable pricing is published at /pricing.json, unauthenticated and identical to the figures printed here.
← DeepSeek V4 Pro profile · Unclassified operation overview · The AFR-1 method
More DeepSeek V4 Pro crossings: Information retrieval · Code modification · Communication